Product details

Origin:USA

Brand:bently

Product ID:3300/10-01-02-00

product description 

The Bentley 3300/10-01-02-00 probe is a probe for mechanical condition monitoring that can 

monitor and record the vibration of mechanical equipment. Here are some things to be aware 

of when using the Bentley 3300/10-01-02-00 probe:

Installation and wiring: Properly install and wire the probe according to the manufacturer's 

installation guidelines. Ensure that the probe is tightly connected to the device and that proper 

probe wiring methods are followed to reduce interference and signal loss.

Calibration: The device must be calibrated before using the Bentley 3300/10-01-02-00 probe. 

This ensures accuracy and reliability of the equipment.

Parameter setting: Set the appropriate vibration monitoring parameters according to the 

characteristics of the equipment to be monitored. For example, set monitoring frequency, vibration 

amplitude and other parameters.

Data recording and analysis: The Bentley 3300/10-01-02-00 probe can record and analyze the 

vibration data of the equipment. By viewing and analyzing the data, you can learn about the operating 

status and potential problems of the device.

Maintenance and maintenance: Regular inspection and maintenance of the equipment to ensure its 

normal operation. If any problem is found, deal with and repair it in time.

Safe operation: When using the Bentley 3300/10-01-02-00 probe, safe operation procedures must be 

followed. Avoid operating equipment in dangerous environments to ensure the safety of personnel and 

equipment.

In short, the use of the Bentley 3300/10-01-02-00 probe requires the correct installation and wiring of 

the equipment, calibration, parameter setting, data recording and analysis, as well as maintenance and 

maintenance operations, and attention to safe operating procedures.