Product details

Origin:USA

Brand:bently

Product ID:72100-04-01-01-01-01-13

product description 

Two-Plane Radial Vibration Monitor

Bentley biplane radial vibration monitor is an instrument used to monitor the vibration of rotating 

machinery. It uses a two-plane radial vibration sensor, which can monitor the vibration of two planes 

at the same time, so as to understand the vibration state of rotating machinery more comprehensively.

The monitor has the characteristics of high sensitivity, high precision and high reliability, and can be 

used to monitor the vibration of various rotating machinery, such as motors, generators, compressors, 

pumps, etc. By monitoring vibration conditions, mechanical faults and anomalies can be found in time 

to avoid equipment damage and accidents.

When using a Bentley biplane radial vibration monitor, it is necessary to install the sensor in the proper 

position of the rotating machine, and set the appropriate sampling frequency and filter parameters. At 

the same time, the sensor needs to be calibrated and maintained regularly to ensure the accuracy and 

reliability of the monitoring results.

In short, the Bentley biplane Radial Vibration Monitor is a very practical instrument that can be used to 

monitor the vibration of rotating machinery and help engineers find and solve problems in time.

Two-plane radial vibration monitor is an instrument used to monitor the radial vibration of rotating 

machinery. It has two independent vibration sensors that monitor vertical and horizontal vibrations 

respectively. This instrument can provide more comprehensive vibration information, including 

amplitude, frequency, phase and other parameters, so as to help users better understand the 

operating state of the machine, prevent mechanical failures, and improve production efficiency.

Configuration:
• Monitor Range: 0 to 5 Mils
• Transducer Type: 7200 Series Prox 200 mV/Mil VT = -24 VDC
• Frequency Response: 240 to 240,000 rpm
• Alarm Timing: 1.0 Sec Delay, Latching
• Fault Protection: Timed Ok/Channel Defeat, Ok Flashing Indicator, Vert. or Horiz., Danger Alarm, 

Binding Posts on Front Panel
• Danger By-Pass Switch: Not Installed
• First Out Alert and Danger: Installed
• Recorder Outputs: +4 to +20 mA ISA Standard