Product details

Origin:USA

Brand:GE

Product ID: IS200BAIAH1B

product description 

The IS200BAIAH1B is a PCB designed for the Mark VI series from General Electric. 

The Mark VI is the fifth release of the Speedtronic steam and gas turbine management

 system developed with triple-redundant backups on protection parameters and critical

 controls. The MKVI includes a computer-based operator interface (either Windows 2000

or XP) and Ethernet communications. The IS200BAIAH1B is designed to function as a 

bridge application interface board. This board provides earth-ground reference and isolation

 for signal inputs from terminal boards. Each board is designed with an onboard EEPROM

 containing firmware not intended for removal or field programming.  

Hardware Tips and Specifications

The IS200BAIAH1B is built with a narrow black front panel. This panel includes a single

 green LED that is marked “IMOK.” The panel also carries the board number and the 

warning “Install in Slot 1 only.”  The IS200BAIAH1B is an Innovation series board, which 

is designed to be placed into a specific rack slot. This board can be damaged if it is installed 

into the improper rack slot. Because of this damage risk, it is important too to consider PCB

 dimensions before making a purchase decision. This particular printed circuit board comes

 revised with roughly-measured dimensions of 12 inches lengthwise by 9 inches wide. The 

thickness of this PCB is no greater than an inch and a half.

The IS200BAIAH1B has three relays, six varistors, four jumper switches, three test points, 

 and several integrated circuits. The board has two backplane connectors located on one

 edge. These backplane connectors are labeled as Pancon 106-128-023 connectors, which 

have a generally low market availability. Jumpers should be placed in either the VIN position

 or the 4-20 mA position. The aforementioned black front panel of the IS200BAIAH1B printed 

circuit board has openings in two central positions, allowing for user access of board parts 

labeled TP1 TP2 and TP3; three different available testing points.