Product details

Origin:USA

Brand:GE

Product ID: IS200ICBDH1ABB

product description 

The IS200ICBDH1ABB (ICBD) is a Printed Circuit Board that was initially created by GE. 

The ICBD has been discontinued by GE and is now a little hard to find. AX Control makes 

every attempt to keep the IS200ICBDH1ABB in stock as a new surplus or refurbished board.

There are many different parts that make up the IS200ICBDH1ABB. There are 61 capacitors, 

10 diodes, 3 transformers, 4 transistors, 95 resistors, a fuse, 15 total integrated circuits, and 

an inductor coil. There is also an 8-pin female circular port, an RS-232 female 9-pin port, and

 four ethernet jacks that are labeled J12A, J12B, J11A, and J11B. There are three black pin 

connectors that have 40 pins, 10 pins, or 26 pins. In the center of the 40 and 26-pin connectors

 is a white 9-pin male connector. There are three white 96-pin female ports and 4 stab-on 

connectors that are labeled CHAS 1, CHAS2, CCOM 2, and CCOM1. There are factory-drilled

 holes on the four corners of the ICBD that are used for mounting the board into place. There

 are two terminal screws on two of the corners that wires can be connected to. The part number

 label for this board is located on the left side of the board and is close to the fuse.

The IS200ICBDH1ABB can connect to a metallic chassis (sold separately) that can then be 

mounted to other PCBs within a rack.

For information on how to install this board please consult the original datasheets and guides

 for the IS200ICBDH1ABB made by GE.