Product details

Origin:USA

Brand:GE

Product ID: IC200MDL742LT

product description 

summarize

IC200MDL742: Manufactured by GE Automation and Controls, it is the VersaMax

 family of discrete output modules.

Output points: The device provides a group of 8 output points, which can be positive

 logic or power type.

Power requirements

Backplane power supply: In addition to the standard backplane power supply, the

 module requires an external DC power supply to enable output load switching.

Stability: The backplane power supply must be stable for at least one second before

 the device receives field power. If the field power supply is applied before the 

backplane is stabilized, a false output point failure may occur.

Short circuit protection: In the event of a short circuit being detected, the external

 power supply must provide sufficient field power for the product.

Fault detection

This module provides fault detection diagnostics to determine if an overload or short

 circuit has occurred.

Protection mechanism

Each output point has electronic short circuit protection (ESCP) and overcurrent 

protection mechanisms.

Inter-channel isolation is not supported.

Current and voltage

Each output point can handle up to 2 amps of current at 30 volts DC.

The entire module is capable of driving a current of up to 8 amps.

The current consumed from the 5-volt backplane is 50 mA.

The output voltage range is 17.5 to 30 volts DC, the nominal output voltage is 24 volts 

DC, and the maximum allowable output voltage drop is 0.5 volts.