Product details

Origin:USA

Brand:GE

Product ID: IC200PBI001CA

product description 

summarize

• IC200PBI001 module: Versamax Network Interface Unit (NIU) manufactured

  by GE Fanuc.

• Function: Used to control I/O modules.

• Power supply: Power supply installed directly on the unit.

• Current consumption: 250 mA of current from a 5 volt bus and 10 mA of current

  from 3.3 volts.

• Number of I/O modules: Each network unit has 64 I/O modules, which can be

  expanded with expansion racks.

• Profibus Network address: Range from 1 to 125.

• Network data rate: range from 9.6 Kbaud to 12 Mbaud, data rate is automatically

  detected by NIU.

• Memory: The runtime uses 5 bytes of memory for user diagnostic data.

• LED Indicators: The front panel has 4 LED indicators for the power, health, failure,

  and network status of the device, and a Force LED.

Update and configuration

• Firmware update: During the update process, switch the controller to stop mode

  and disconnect the network cable from NIU.

• I/O data volume: 375 bytes of I/O data can be processed at a time.

• Address selection: The front panel has a rotary switch, adjusted with a flat-head

  screwdriver, for selecting addresses in the range 1-125.

Installation and connection

• Installation: Easy to install and can be stuck directly on the DIN rail.

• Power connection: Use a latch to connect the power to NIU. Make sure the connectors

  and latches match and are stuck together.

• Site support: Up to 32 sites are supported without the use of Repeaters.

• Connector type: Equipped with 9-pin D-sub connector.