[Product Description]:

The GE Fanuc’s IC698RMX016 is a 16MB Redundant Memory Xchange for the Rx7I Pacsystem.  It has the following sizing: 6.299 inches widde x 9.187 inches high. It has 16MB of SDRAM user memory. The operating voltage from power supply is +5 V DC. Current requirements are 1.8A. The unit has a fiber optic LC type connector which, conforms to IEC 61754-20, and a zirconium ceramic ferrule. The maximum insertion loss is 0.35 dB with a return loss of -30dB. An acceptable temperature range is between -20°C and +85°C. To complete installation, you need to make sure you have all of the following: A PACSystems RX7i CPU with release 2.00 or later firmware; a PACSystems Rx7i CPU rack with power supply; a PC-compatible computer with CIMPLICITY Machine Edition – Logic Developer PLC, version 4.5 or later programming software and the necessary cables.

Note that in order to meet radiated emission standards, RX7i systems that include more than one Memory Xchange modules have to be installed in a conducting metal enclosure, or equivalent. Memory modules should only be installed in RX7i Rack 0 (main). It is advised that RMX modules are installed in slots 4 and 3 of the main rack. This provides the RMX modules VME interrupt request priority. Although such configuration is advisable, locating RMX modules in slots 4 and 3 is not strictly required. To install IC698RMX016 Redundant Memory Xchange, make sure the rack power is switched off. Next slide the module into the exact slot it was configured for in the system. Proceed to press the board in place without forcing it. Tighten faceplate top and bottom screws. Next make sure to connect cables to RX and TX connectors. The fiber optic cable should be routed from the TX connector to next node’s RX connector. Connect the that board’s TX cable to next node’s RX connector. Repeat until last node in the ring has its TX routed to the RX connector of the first node. Turn the power on.

The IC698RMX016 initially powers in a non-configured state where its optical transmitter is disabled. The Redundant Memory Xchange module will not operate on a network before the RX7i CPU sends the module a hardware configuration.  For the purpose of reflective memory operation, the user can choose to configure the following parameters: Redundant Transfer Mode, Node ID, Network Memory Offset, Rogue Master, and Interrupt enable. Note that if the Redundant Link operation is selected, the above-mentioned parameters will be set by the CPU and are therefore not configurable.  Note that when IC698RMX016 is used as a reflective memory module with a general purpose, additional functions that extend beyond the basic read and write operations, inclusive of reading interrupt status, enabling interrupts, reading parity errors, and enabling parity may be performed by user logic.

[Our main products]:

DcS system card of ABBPLC includes some discontinued control system module card. (For example, PM645B, 5SHY3545L0014, PM630, 07AC91D, SPHSS13, PP845PFEA111-20, PFEA112-65 PPD113B01-10-150000, PPD115A102, PPD113-B03-23-111615)

◆GE Gas Turbine clamp :IS200 series, DS200 series, such as IS200TRPGH1B, DS20OPCCAG1A.

◆Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) architecture. (For example, 3721, 3625, 3008, 4351B, 3805E)

◆Foxboro(Foxboro):1/ASeries system, FBM(field input/output module) sequence control, etc. (e.g. FBM201, CP270, CP4OB, FCP280, FCP270)

◆BentlyNevada(Bentley): Card of the 3500 system. (Example :3500/15, 3500/22M, 3500/42M)

◆ HIMA(Dark horse):F8650X, F8627X, F8651XF8652X, F35 etc

◆Motorola :MVME162, MVME167, MVME1772, MVME177 and other series

◆X001:1/0, Vne board and processor. (Example :XVME-653, XVME-674, XVME-976)

◆Rockvell(Allen-Bradley): Series 1756, 1757, 1753 and 1394. (Example :1756-L73XT, 1756-L61, 1757-SRM)

◆Reliance: Spare parts (e.g., 0-60002-6, S-D4022, S-D4006-D)

◆Westinghouse Emerson :VE3007, CE3008, 5X00105G14, 5X00119G01, 1X00416H011X00416H01

◆Schneider :140 series processor, control card, power module, etc. (For example, 140CPU67160C, 140CPU67260, 140CPU65150, 140CPU43412, 140NWM110000

◆ABB: Industrial robot DSQC series (series :DSQC202, DSQC545A, DSQC627, DSQC352, DSQC679)

◆Rexroth :1/0 module PLC controller driver, etc. (For example, TVD1.3-15-03, KDV3.1-100-220

◆Woodward: Control governor, etc. (e.g. 5644-414, 5466-409, 9907-164)

[Order please contact us]:

Contact :15339537573 (same wechat number)

QQ: 2054523139

Mail box：2054523139@qq.COM

Note; All the products on this site are special products, the market price has been fluctuating, the specific customer service quotation shall prevail, the product models are many, can not be uploaded one by one, if there is not found the model, can contact customer service at any time. Store product price, not real price, before bidding please contact customer service for accurate price and delivery time, sorry for the inconvenience to you!

[Disclaimer]

Guizhou Yuanmiao Automation Equipment Co., LTD. We sell new products and discontinued products, independent channels to purchase such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder

We will let time prove that your choice is not wrong! We will use sincere service in exchange for your 200% satisfactionHigh quality low price spot to provide your satisfaction is our goal for effortsCooperative customers, before ordering can provide the qualification and the recent sales issued the scanning copy of the bill for inquiry.After-sales problems: Execute according to the brand manufacturer's standard, guarantee after-sales service, one-year warranty for all products, etc