[Product Description]:

The IC697ALG320 is a high-level analog output module and is fully compatible with GE Series 90-30 modules. Voltage and current outputs are on a single module, and the output module has four individually configured outputs for either current or voltage. Additionally, the module provides bipolar or unipolar outputs. The IC697ALG320 analog output system provides 0 to 22.5 milliamp current loop signals with individual user scaling on each output channel. This particular output system has a fast update rate and requires no jumpers or DIP switches for configuration. It is also factory calibrated with data stored in the non-volatile EEPROM memory. Configuration of the IC697ALG is simple using MS-DOS or Windows programming software.

The high level analog output for the PLC accepts digital data from the CPU or other controllers by accessing the PLC backplane. The output is then converted by a D/A converter to analog outputs up to ten volts. The basic converter offers 16 bits of resolution with 14 bit monotonicity. Additionally, the outputs are isolated from the backplane so they are protected against steady state or transient overvoltage conditions. While it is expected for this analog system to have output loads that will be floating or tied to the same potential, it is designed to allow up to 0.5 VDC compliance voltage difference between outputs. This prevents ground loop currents or errors from happening. Additionally, outputs will operate properly in the presence of a large amount of high frequency noise if needed.

To connect the IC697ALG320 module from user devices, use screw terminals on the removable 40 terminal connector block that is mounted on the front of the module. All field connections should be wired to the I/O terminal board with good grade, twisted shielded instrumentation cable. 

Technical Specifications

Voltage Output Range: -10 to +10 volts

Current Output Range:    0.0 to 22.2 mA  (4 to 20 mA default)

Calibration: Factory set at 10 volts +/- 2mV

No of Outputs: 4 outputs

Module Type: Analoag Output Module

Power: + 5 volts@ 1.66A,  150mA of DC

[Our main products]:

DcS system card of ABBPLC includes some discontinued control system module card. (For example, PM645B, 5SHY3545L0014, PM630, 07AC91D, SPHSS13, PP845PFEA111-20, PFEA112-65 PPD113B01-10-150000, PPD115A102, PPD113-B03-23-111615)

◆GE Gas Turbine clamp :IS200 series, DS200 series, such as IS200TRPGH1B, DS20OPCCAG1A.

◆Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) architecture. (For example, 3721, 3625, 3008, 4351B, 3805E)

◆Foxboro(Foxboro):1/ASeries system, FBM(field input/output module) sequence control, etc. (e.g. FBM201, CP270, CP4OB, FCP280, FCP270)

◆BentlyNevada(Bentley): Card of the 3500 system. (Example :3500/15, 3500/22M, 3500/42M)

◆ HIMA(Dark horse):F8650X, F8627X, F8651XF8652X, F35 etc

◆Motorola :MVME162, MVME167, MVME1772, MVME177 and other series

◆X001:1/0, Vne board and processor. (Example :XVME-653, XVME-674, XVME-976)

◆Rockvell(Allen-Bradley): Series 1756, 1757, 1753 and 1394. (Example :1756-L73XT, 1756-L61, 1757-SRM)

◆Reliance: Spare parts (e.g., 0-60002-6, S-D4022, S-D4006-D)

◆Westinghouse Emerson :VE3007, CE3008, 5X00105G14, 5X00119G01, 1X00416H011X00416H01

◆Schneider :140 series processor, control card, power module, etc. (For example, 140CPU67160C, 140CPU67260, 140CPU65150, 140CPU43412, 140NWM110000

◆ABB: Industrial robot DSQC series (series :DSQC202, DSQC545A, DSQC627, DSQC352, DSQC679)

◆Rexroth :1/0 module PLC controller driver, etc. (For example, TVD1.3-15-03, KDV3.1-100-220

◆Woodward: Control governor, etc. (e.g. 5644-414, 5466-409, 9907-164)

[Order please contact us]:

Contact :15339537573 (same wechat number)

QQ: 2054523139

Mail box：2054523139@qq.COM

Note; All the products on this site are special products, the market price has been fluctuating, the specific customer service quotation shall prevail, the product models are many, can not be uploaded one by one, if there is not found the model, can contact customer service at any time. Store product price, not real price, before bidding please contact customer service for accurate price and delivery time, sorry for the inconvenience to you!

[Disclaimer]

Guizhou Yuanmiao Automation Equipment Co., LTD. We sell new products and discontinued products, independent channels to purchase such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder

We will let time prove that your choice is not wrong! We will use sincere service in exchange for your 200% satisfactionHigh quality low price spot to provide your satisfaction is our goal for effortsCooperative customers, before ordering can provide the qualification and the recent sales issued the scanning copy of the bill for inquiry.After-sales problems: Execute according to the brand manufacturer's standard, guarantee after-sales service, one-year warranty for all products, etc