[Product Description]:

The IC697BEM713 is a Bus Transmitter Module (BTM) from the series 90-70 manufactured by GE Fanuc. The IC697BEM713 module allows expansion from the main CPU rack when the system requires additional modules (up to seven added IC697 PLC racks). The high performance parallel programming function is an important feature. Additionally, this BTM is easy to configure and does not require the use of DIP switches.

The IC697BEM713 module resides in a single slot and has two connectors, a top connector for attaching to the programming device and a bottom connector, which is for a daisy-chained arrangement via BRMs to expansion racks. The bus transmitter module should be configured using the MS-DOS or Windows programming software configuration function.

Status LEDs (3) alert the user to issues with the port and/or module. The top MODULE OK LED will show ON when CPU software completes BTM configuration and has polled each system expansion rack. It will emit OFF when or if these conditions are not met. The middle Programmer Port Enabled LED may blink or show ON to indicate the programmer and the PLC are communicating. It will emit OFF when they are not communicating. The bottom Expansion Port Enabled LED indicates the status of the expansion bus. This LED may blink ON when the BTM is communicating with the Bus Receiver Modules or OFF if they are not.

When installing the IC697BEM713, the user should have the appropriate programmer controller manual for reference. The power must be OFF before beginning. Once the module is installed in the main CPU rack, power can be turned out. It is important to note, however, that the module cannot be installed in slot 1. It must be installed to the right of any IC697 interrupt source modules. 

Technical Specifications

Module Type: Bus Transmitter

Eff. Data Rate: 500 Kbytes/sec

Allowed Distance of Cable:  50 feet

Discrete Points Available: N/A

Serial Ports: 2

Current Required: 1.4 Amps

[Our main products]:

DcS system card of ABBPLC includes some discontinued control system module card. (For example, PM645B, 5SHY3545L0014, PM630, 07AC91D, SPHSS13, PP845PFEA111-20, PFEA112-65 PPD113B01-10-150000, PPD115A102, PPD113-B03-23-111615)

◆GE Gas Turbine clamp :IS200 series, DS200 series, such as IS200TRPGH1B, DS20OPCCAG1A.

◆Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) architecture. (For example, 3721, 3625, 3008, 4351B, 3805E)

◆Foxboro(Foxboro):1/ASeries system, FBM(field input/output module) sequence control, etc. (e.g. FBM201, CP270, CP4OB, FCP280, FCP270)

◆BentlyNevada(Bentley): Card of the 3500 system. (Example :3500/15, 3500/22M, 3500/42M)

◆ HIMA(Dark horse):F8650X, F8627X, F8651XF8652X, F35 etc

◆Motorola :MVME162, MVME167, MVME1772, MVME177 and other series

◆X001:1/0, Vne board and processor. (Example :XVME-653, XVME-674, XVME-976)

◆Rockvell(Allen-Bradley): Series 1756, 1757, 1753 and 1394. (Example :1756-L73XT, 1756-L61, 1757-SRM)

◆Reliance: Spare parts (e.g., 0-60002-6, S-D4022, S-D4006-D)

◆Westinghouse Emerson :VE3007, CE3008, 5X00105G14, 5X00119G01, 1X00416H011X00416H01

◆Schneider :140 series processor, control card, power module, etc. (For example, 140CPU67160C, 140CPU67260, 140CPU65150, 140CPU43412, 140NWM110000

◆ABB: Industrial robot DSQC series (series :DSQC202, DSQC545A, DSQC627, DSQC352, DSQC679)

◆Rexroth :1/0 module PLC controller driver, etc. (For example, TVD1.3-15-03, KDV3.1-100-220

◆Woodward: Control governor, etc. (e.g. 5644-414, 5466-409, 9907-164)

[Order please contact us]:

Contact :15339537573 (same wechat number)

QQ: 2054523139

Mail box：2054523139@qq.COM

Note; All the products on this site are special products, the market price has been fluctuating, the specific customer service quotation shall prevail, the product models are many, can not be uploaded one by one, if there is not found the model, can contact customer service at any time. Store product price, not real price, before bidding please contact customer service for accurate price and delivery time, sorry for the inconvenience to you!

[Disclaimer]

Guizhou Yuanmiao Automation Equipment Co., LTD. We sell new products and discontinued products, independent channels to purchase such special products. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder

We will let time prove that your choice is not wrong! We will use sincere service in exchange for your 200% satisfactionHigh quality low price spot to provide your satisfaction is our goal for effortsCooperative customers, before ordering can provide the qualification and the recent sales issued the scanning copy of the bill for inquiry.After-sales problems: Execute according to the brand manufacturer's standard, guarantee after-sales service, one-year warranty for all products, etc