Product details

Origin:USA

Brand:GE

Product ID: IC210DDD024

product description 

The IC210DDD024 is a controller in the GE Fanuc Automation Durus-20 series that 

features a 20-point AC power supply in a voltage range of 85-265 VAC and 85-265 VDC.

 The controller is expandable and comes with an LCD screen and keyboard. Its specifications

 are 12 AC inputs /8 outputs (8 amp relays).

Modules must be mounted horizontally on DIN rails or vertically on vertical surfaces. Do 

not mount on a horizontal surface or in a rotating direction. To attach the expansion module,

 press the latch on the expansion module, insert it into the main module, and then attach the 

expansion unit to the panel using two screws.

When mounting the controller on the DIN rail, first place the module on the DIN rail so that the 

upper mounting latch hangs behind the rail, then rotate the module downward until it snaps into 

place while the lower latch is secured around the rail. To remove the IC210DDD024, pull out the 

mounting latch. Install mounting clamps at both ends of the device to secure it to the DIN rail.

The next step after installation is field wiring, where the sensor should be connected using only 

3-core cables. Use locking screws to secure the wires securely to ensure good contact. Install 

an external fuse between each power supply and load.

The field wiring is followed by the transport application. First, install the memory options module 

by removing the cover of the memory room on the controller module. Then put the memory options

module into the slot. Connect the programming computer.