Product details

Origin:USA

Brand:GE

Product ID: IC210EPS001

product description 

Basic information

• IC210EPS001 is an extension of the DeviceNet slave station communication module.

• The module is manufactured by GE Fanuc Automation and belongs to the Durus series.

• The protocol supported by this unit is DeviceNet Group 2 Only Slave Device.

• Power supply is 24 VDC.

• The dimensions are 38 mm x 90 mm x 58 mm.

• The life cycle is maturity.

• The network data rate can be 125K, 250K or 500K.

• Each Durus controller supports one communication expansion unit.

Functions and features

• The expansion module IC210EPS001 enables the Durus controller to interface

  with the DeviceNet communication bus and operate as a DeviceNet Group II Only

  Slave device.

• When installed in a controller, this expansion module must be the only communication

  module that exists.

• Supported object classes include Identity, Router, DeviceNet, Connection, Assembly,

  Control, Interface, and Application. The last four object classes are optional.

• Network parameters include the baud rate and MAC ID set via the 8-bit DIP switch,

  not via the network.

• The module has pre-defined DeviceNet functions such as master-slave connection,

  explicit message connection and polling ID message connection.

• It also includes features such as explicit and I/O message fragments, repeated MAC

  ID checks, and UCMM unavailable devices.

• Bit-strobe I/O messages, device heartbeat messages, and device shutdown messages

  are not supported.

• The module has power supply terminals and retractable mounting pins.

• If the module's LED network status light turns red, it indicates that a critical link failure

  has occurred, resulting in an interruption of network communication.

• If the LED indicator of the module turns red, it indicates that the module has an unrecoverable

  fault and needs to be replaced. If the indicator blinks red, the fault is recoverable.