Product details

Origin:USA

Brand:GE

Product ID: IC220BEM485

product description 

Basic information

• IC220BEM485 is an analog input module in GE Fanuc Automation's

  VersaMotion system.

• The module has 2 current channels and an active life cycle state.

• Input voltages are 0-20 mA, 2-20 mA, ±20 mA, 0-10 volts, and ±10 volts.

• There are 2 input points.

• The connection is a 2-wire shielded sensor cable connection.

• The converter takes 120 microseconds and the module update rate is

  less than 1.5 microseconds.

• Input resistance greater than 220 kohn (voltage) and 50 ohms (current).

• The limited frequency of the input filter is 40 Hz.

• The current consumption of the local bus UL is 45 mA (typical).

Functions and features

• The module has a bus diagnostic LED indicator.

• The required terminal board is IC220TBK062 (contains 5 pieces).

• The analog input module receives signals from current and voltage input

  devices.

• Dedicated modules for RTD and thermocouple input are available.

• The device is part of the remote cabinet kit. Each remote cabinet has five

  IC220alg220s, and the control cabinet has five remote cabinets.

• The maximum cable length of the device is 250 meters.

• The datasheet number of the analog input module is GFK-1906.

• The UL current consumption of the device is 88 mA and the UANA current

  consumption is 15 mA.

Physical specification

• The housing dimensions are 12.2 mm (W) x 120 mm (H) x 71.5 mm (D).

• The power supply for the sensor requires an external power supply.

• The operating temperature must be between -25°C and 55°C.

• The storage temperature must be between -25°C and 85°C.

• The working humidity is 75% on average and shall not exceed 85%.

• The protection level is IP 20 (according to IEC 60529).

• The module has level 3 protection from VDE 0106 and IEC 60536.

• The total power consumption is approximately 0.63W.